Hi all, I have been on the board for a short time and have been enjoying and learning. Our build just started and with the help of a fellow board member were able to contact Nautique and get build pics. We loved the 2011 orange crush/gunmetal SANTE 210 that N3 Boatworks built so we did one very similar but with black tower and black trailer. This is our first inboard and only our second boat. We are coming from a Yamaha 212x jet boat so this will be a huge change/upgrade.







"Well it is through the grinding bay, the floor was dragged in and sanded, the bilge was gel coated. It is outside again as it waits its turn to go on to the assembly line (tomorrow). These pictures do not do the boat justice as far as the colors go. The metal flake really pops in the sun light." - Nautique
"Well it is through the grinding bay, the floor was dragged in and sanded, the bilge was gel coated. It is outside again as it waits its turn to go on to the assembly line (tomorrow). These pictures do not do the boat justice as far as the colors go. The metal flake really pops in the sun light." - Nautique
Comment