Tweet
I purchased a pair of Wetsound tower speaker and originally purchased a Cadence ZRS-1502 as the amp (recommended by WetSounds) but decided to go with a smaller amp. I have it to sell, brand new still in the box, I would like to get $200 out of it if anyone is interested.
-
-
RE: Cadence ZRS-1502 Amp
I would be interested. Can you tell me more about it? Can you adjust one channel for highs and one for lows with the crossover, in other words, is there a crossover for each channel? I would use it to run at 2 ohms with one side running the lows and one side running the highs. Can you adjust each channel indepently?
You can hit me back at tfling@merchantsnat.com for a quicker response.
TravisTravis Fling
Choctaw Lake
Current - 1989 Ski Nautique 2001 -
RE: Cadence ZRS-1502 Amp
Travis I just responded to you via email, a little information about the amp:
SPECIFICATIONS:
4 Ohm RMS Power: 2 x 150 Watts @ 13.8 Volts
2 Ohm RMS Power: 2 x 300 Watts @ 13.8 Volts
4 Ohm Mono RMS Power: 1 x 600 Watts @ 13.8 Volts
Frequency Response: 10Hz - 40KHz
Channel Seperation: >65 dB
S/N Ratio: >100 db
Damping Factor: >200 @ 100Hz
Minimum THD: <0.044%
Input Voltage: 200 mV - 8 Volts
Dimensions: 15" x 9.4" x 2.4"
FEATURES:
High Speed Mosfet Power Supply
Bi-Polar Japanese Sanken Output Devices
Copper Rail PCB Architecture
24 dB Crossover Circuitry
Fully Adjustable Low/High Pass Crossover
High Pass Crossover: 50Hz - 500Hz
Low Pass Crossover: 50Hz - 150Hz
Bass Boost Equalization: 0-18db @ 45Hz
Lucite Encapsulated Large 4 Gauge Terminals
Soft Start Mute & Delay
Adjustable Phase ControlComment
Comment