New Ram Lin Trailer

[McGator83]

Used once, my boat is in dry dock. Fits direct drive inboards. Fold back tongue. Very nice $2999.00

[swooddc]

RE: New Ram Lin Trailer

is that a trailer for 196, 206, or 216? and where is it, FL maybe?

[AirTool]

RE: New Ram Lin Trailer

I think it will fit all three but is currently set for a 196. My 206 trailer is very similar but the catcher's mit is mounted up on the swing-away part. Click on the photo and you'll see the bolt holes where the post mounts. I'm guessing that gives them the flexibility to cover at least three boats.

Note the bunks will not touch a 196 or 206. I'm not sure about the 216. The bunks are there for another hull but not sure if it is the 216 or another.

AirTool

[swooddc]

RE: New Ram Lin Trailer

thanks, i see that now. where are you gator?

[McGator83]

RE: New Ram Lin Trailer

It came with my 216, I think it will adjust to all 3 mentioned above. I am in Tuscaloosa Alabama, would be more then happy to haul it to someone in the southeast

[AirTool]

RE: New Ram Lin Trailer

Gator - did you move the winch post? If not, is your 216 hanging off the back?

Did your 216 rest on the bunk section also?

Looks like this trailer fits a 216 or longer....not shorter. But I thought all the longer v-drive boats were on bunks...not wishbones.

AirTool

[McGator83]

It came from the dealer on the trailer. I do not think it would fit a longer boat.

[AirTool]

But did you move the winch Post?

You should email Ramlin with your VIN and ask them what it fits. I'm very curious. Posting the answer should help it sell.

ramlin@ramlin.com

[McGator83]

Good idea, thanks, this is my 216 on the trailer

[pbarwick]

You still have this?

You still have trailer?

[crowmobe540]

RE: You still have this?

Any idea whether it would fit a 2003 210?

[AirTool]

RE: You still have this?

It will not fit a 210.

AirTool

[NAVYFLYER]

trailer

do you still have the trailer

[McGator83]

still have it, need to sell it

[CradGen2]

I'm pretty sure the 216 trailer is longer then the 196 and 206 trailers.

I'm sure it would work, but the motor won't be centered over the axles.