Welcome to PLANETNAUTIQUE! We're glad you're here. In order to participate in our discussions, you must register for a free account. With over 25,000 registered members already, we would love to have you as a member too! Click here to access our Registration Page. Registration is quick and easy, and we keep any information you give us completely confidential. Once registered, you may sign in using the drop-down Login or Sign Up window at the upper right corner of the site.
Everything I have is in the photo. On my boat it plugged into the guage box under the dash. If you have a similar model boat, you could plug this into the existing guage computer box. I am not sure if boats without perfect pass from the factory can plug right in.
This did come out of a DBW boat, so older boats are probably out of the picture.
I cannot sell the paddle wheel and everything given that the boat speedo runs off of the wheel as well. At least that is my understanding.
The newer boats allow PP to just connect to the box under the dash. No separate computer or servo needed. This change came about when DBW was released.
I own and operate Silver Cove Marine, which is an inboard boat restoration, service, and sales facility located in Mooresville, North Carolina. We specializes in Nautiques and Correct Crafts, and also provide general service for Nautiques fifteen years old and older.
If we can be of service to you, please contact us anytime!
Comment