Trade Acme 1234 for Acme 644?

[Mikeski]

It's been confirmed twice that the 1234 prop on a 211 is not good for waterskiing so I am looking to trade my expensive used once 14" prop for the good old team prop (644). The specs on the 1234 are: 4 Blade 14.5 x 14.25 RH 1 1/8 Bore

The specs on the 644 are: 4 blade 13.25x16, .105 cup, 1-1/8" bore

The new price of the 1234 is $581 less discount, the new 644 is $478 less discount from delta prop.

This is an opportunity for somebody with a newish 644 to get a significant upgrade. I am not interested in a rebuilt or repaired prop. Used is OK as long as it has not been damaged.

shoot me a message if you have a like new 644...

mikeskiw@gmail.com

[OKWAKEBDR]

RE: Trade Acme 1234 for Acme 644?

Will the 1234 fit my 2005 210? If so...you've got a deal. I took off my 644 for an 856 about 3 years ago.

[MNSuperAir]

RE: Trade Acme 1234 for Acme 644?

Sorry, but I was told it would not fit from ACME.

[bchesley]

RE: Trade Acme 1234 for Acme 644?

14" is max on prop diameter on an old school 210. Any more than that and you are just too close to the hull. They even had to add a stainless steel plate in 2000 or 2001 because the prop wash was pitting the gelcote around the rudder port from being too close. They switched to smaller (13.5x17.5) props around that same time to also help. My 98 originally had a 14x18 on it.