flight control towers

[mike-d]

I have two correct craft flight control towers for sale. One is a 2003 brushed aluminum style tower, narrow rear tower pads. brand new, never been installed.
$1800.00 plus shipping

the other is a used 2004 style flight control tower, powered coated black, with predrilled holes for tower speakers etc. $1700.00 plus shipping
both towers come with mounting pads, and brackets.

Must sell, or will buy another boat for them to go on!!!!

Mike
bbmkks@aol.com

[206skiboat]

Tower questions.

I have a 2003 206 ski nautique. Are these towers made for my boat? Do you have any pictures?

[mike-d]

tower

what is your boat width? these are stock super air or super sport towers, bolt on. I dont know if they will bolt on to a 206? get me your hull dimensions etc.

Mike

here is a pic with the 04 tower on a 2001.

[206skiboat]

RE: tower

My boats is in storage. I can get better dimensions after New Years. My manual has a Beam of 91.5" and length without platform of 20' 7.5". Do you have a picture of the 03 tower.
Thanks,
Jeff

[skinautique]

RE: tower

Mike,
Please don't tell me that you disassembled that much of your boat to install a tower. Way too much work.
Ski206, that tower will not fit your boat. The dimensions are too far off.

[mike-d]

2001 boat

I dropped a 3/4 inch socket in the boat, kept on rattling in the boat, so I dissasembled it, one section at a time. :wink:

the tower was set on top of the boat for picture purposes. It could fit on any size boat, as long as you have a good welder!

Mike

[skinautique]

RE: 2001 boat

That makes more sense Mike!

[skier8100]

tower

Would the black tower fit a 97 SN?

[skinautique]

RE: tower

Probably not without some SERIOUS bending and flexing. The ski deck is a bit narrower.

[mike-d]

2003 tower picture

updated pic on 2003 fct

[1time17]

RE: 2003 tower picture

still have the one for a 2001 oldey how much

[mike-d]

2001 tower?

the black tower on the 2001 is a 2004 used takeoff tower. I dont know if it will fit, you will have to cut it in the middle to make it fit. I hope you know a good welder, but you would have one rare looking 2001!!

Mike

[icewake]

RE: 2001 tower?

I have a 1999 Ski Nautique with open bow, I was told the cup holders might be in the way. But also would one of those tower fit on the boat?

[Labatt911]

RE: 2001 tower?

I know you have gotten a lot of questions reguarding fit on particualr boats. If you don't mind one more I am looking into the purchase of a 2000 Super Sport, will the black 04 style tower fit on that boat. Quess I should have started out with the question is the tower still available? If yes to both, where are you located and how much to ship to NE Ohio