Custom Cover for Sport Nautique with Tower

[scarbs]

I had this cover for sale a few months ago. It was originally from a 2006 220, but I had it modified to fit my 1995 Sport Nautique. I have since changed my tower so it doesn't fit now. I also decided to get a lighter-colored cover instead of modifying this one again to fit my new tower because I have to store my boat outside and the black gets too hot during Arizona's summers, so I don't need this one anymore. Cover is in great condition with no holes (I repaired the one pin hole it had before) and it provides excellent coverage. I believe that it is made from Sunbrella material, but I could be wrong. The tower in the photos has similar dimensions to the original Flight Control Towers. The hole for the front leg is about 68" from the front of the boat and the rear leg is about 50" from the front leg. I am selling if for (far) less than I have into it--$175 plus shipping. Please let me know if you have questions.

[AussieNorts]

Will this cover suit a 1997 sport/air with sloped transom with original flight control tower series 1? IS the cover trailerable e.g does it fit tight? And are you willing to ship to Australia? Obviously I will pay for shipping.

[scarbs]

AussieNorts--I can't guarantee it, but this cover should fit a 1997 sport/air with an original flight control tower. I am happy to take any measurements that you need to feel comfortable with the fit. I trailered it for about half of a season and several times in the off season with no issues. And I live in Phoenix, Arizona, so all of the "local" lakes are 45-90 minutes away, so most of the trailering was at freeway speeds (65-75 mph). When its all strapped and cinched down, it's quite tight. I'm also willing to ship to Australia, but may need some instruction on the details for such. Shoot me an email with additional questions or comments at jscarbrough4@gmail.com.

[OrlandoNautique]

scarbs:

Is this still available? I have a '96 Sport Nautique with an aftermarket Monster tower and will need to do some measurements, but didn't want to waste my time if its gone.

Also, would this cover work for when the boat is in the water? From the pictures it looks like the rear of the cover may go a little too low. Also not sure if it would be tight enough without the tie-downs to the trailer.

Thanks.

[scarbs]

Orlando Nauique: I still have the cover. Let me know your measurements and I'll check for you re fit. It may work in the water if you put tall enough poles beneath it. The rope that goes around the rub rail can be cinched pretty tight. Let me know if you have interest.

[jefhaz02]

scarbs:

Is this cover still for sale? Interested if so. I have a 2004 SAN 210 and wondering if it would fit. From looking at the cover, it looks like the overall size would fit, just curious about the measurements to your tower. Thanks and let me know.

Jeff

[scarbs]

Sold!