Tweet
I was searching for a MEFI Scan tool on my local CL and found this listing for this wire harness. I know it's a long shot, but I thought somebody might be able to use it?
http://losangeles.craigslist.org/wst...430436886.html
Here is the write up.
Here is a Pleasurecraft Marine PCM 5.7L EX330 2005 Ski Nautique ETC wiring harness with the Electronic Throttle Control TAC drive by wire DBW module. The harness part number is RA121079B. It can be used with both 5.0L and 5.7L engines. The TAC module number is TMD1-160G1 404-000964. The whole harness and all components are in very nice condition, and the setup was taken off a running boat with relatively low hours to convert to a zero off setup. It was used with a Delphi MEFI 4B ecm controller, but would work with a MEFI 4 or 4A also. If you need the calibration for the MEFI ecm contact me. This harness and setup may work for other manufacturers engines and boats also such as Indmar, Marine Power, Kodiak, etc. Check the boat connector pin out for compatibility.
The manual for the PCM DBW setup and MEFI controller is at:
http://www.pleasurecraft.com/manuals/ L510005P-S1.pdf
http://www.pleasurecraft.com/manuals/L51 0005P.pdf
http://losangeles.craigslist.org/wst...430436886.html
Here is the write up.
Here is a Pleasurecraft Marine PCM 5.7L EX330 2005 Ski Nautique ETC wiring harness with the Electronic Throttle Control TAC drive by wire DBW module. The harness part number is RA121079B. It can be used with both 5.0L and 5.7L engines. The TAC module number is TMD1-160G1 404-000964. The whole harness and all components are in very nice condition, and the setup was taken off a running boat with relatively low hours to convert to a zero off setup. It was used with a Delphi MEFI 4B ecm controller, but would work with a MEFI 4 or 4A also. If you need the calibration for the MEFI ecm contact me. This harness and setup may work for other manufacturers engines and boats also such as Indmar, Marine Power, Kodiak, etc. Check the boat connector pin out for compatibility.
The manual for the PCM DBW setup and MEFI controller is at:
http://www.pleasurecraft.com/manuals/ L510005P-S1.pdf
http://www.pleasurecraft.com/manuals/L51 0005P.pdf