Z5 Bimini off of a 2009 SANTE 210 - for sale

[martymizah]

I have a Z5 bimini (black) on a 2009 SANTE 210 with FCT3 tower. I am switching to an over the tower Bimini for the head room and to allow me to lower the tower more easily.

I have the boat out of storage and the rack is removed. I have no idea if this will fit any other boat/tower setup, so do some research first.

[martymizah]

Admins - feel free to move this to classifieds, posted it here on accident

[srock]

pm sent

[martymizah]

So I just confirmed, I have to sell this Z5 bimini. I need to lower the tower to get the boat under a bridge and it is just too much of a hassle to do it with this bimini. My loss is your gain - let me know if you are interested!

[martymizah]

Here is the bimini on the boat.

[srock]

I have a Z5 bimini (black) on a 2009 SANTE 210 with FCT3 tower. I am switching to an over the tower Bimini for the head room and to allow me to lower the tower more easily.

I have the boat out of storage and the rack is removed. I have no idea if this will fit any other boat/tower setup, so do some research first.

I have been searching for this answer for a while with no luck but I may have some answers soon on the 200 and 230. You can help by providing the following dimensions for the FCT3 tower.

[srock]

Here it is Rack.pdf

[martymizah]

I'll pull these dimensions tonight.

[srock]

Here are the dimensions for at 2009 200 with FCT 3.

[martymizah]

just so i do it the same... is that from 'outside edge to outside edge' for each of the bars, or is it centerline to centerline.

[srock]

Centerline to Centerline.

This will be a useful post becasue in my search for a used Z5 I found many people searching for a cross reference between models pre 2009 boats. Z5 does not have fitment information for tops of this age.

Of note, Great Lakes Boat Top Company does have the patterns to make new bimini and cargo rack replacement canvass.

[martymizah]

See the attached file. I think most of the dimensions are the same, except mine are centerline to centerline. If you go outside to outside they seem to line up. with that said, there are two glaring discrepancies that I highlighted in orange. I would double check your measurements because I have a hard time believing all the dimensions are the same except these two which are off by multiple inches

[srock]

See the attached file. I think most of the dimensions are the same, except mine are centerline to centerline. If you go outside to outside they seem to line up. with that said, there are two glaring discrepancies that I highlighted in orange. I would double check your measurements because I have a hard time believing all the dimensions are the same except these two which are off by multiple inches

I took more accurate dimensions and followed you center mount measurement location. I had transposed a number. I am not surprised by the different width at the tower but I am a little surprised that the overall width is the same and the different length at the front. I hope we can measurements from a 230 with FCT3

[martymizah]

bump

[srock]

PM Sent