FCT for sale

[08sv211]

I have a flight control tower with swivel board racks and mirror from a SV211TE no issues just changed out for Roswell Aviator. $1500 for all. Located in Iowa.

[74corvette]

Im interested in the racks if you could get a tube size of them. I have a 2001 SAN and also located in Iowa

[Morningstar]

What brand and model are the tower racks? I currently have flight clips and have been looking to upgrade.


Sent from my iPhone using PLT Nautique

[08sv211]

Im interested in the racks if you could get a tube size of them. I have a 2001 SAN and also located in Iowa

I am sorry my error in the ad. IÂ’ hope to get tower sold as package B4 selling racks or mirror. I will contact you if tower sells w/o racks.

[brenatl]

I am also interested in the brand of the racks. Id like to replace my flight clips that are bent and this seems like a great upgrade. glws.

[polkaking27]

Do you happen to know the beam of the sv211, or the width between the tower legs. I have a 95 super sport that would love to have the tower but I dont know if it would fit.

Thanks

[08sv211]

Measurements as follows. I took them from inside edge of mounting plates 83.5” on rear and 63” on front. I also took a measurement on the top of the arc 80.5” inside to inside. Side measurements Inside front plate to rear plate about 57” plates don’t line up hard to be accurate on this one. If there is anything else just let me know.

[mdh018]

Any pics of the new tower on the boat? I’ve been interested in seeing an aviator on the sv211.


Sent from my iPhone using PLT Nautique

[08sv211]

Any pics of the new tower on the boat? I’ve been interested in seeing an aviator on the sv211.


Sent from my iPhone using PLT Nautique

I’d like to see one installed too lol but I’ve waited a year hoping to see one on a SV211 but nothing out there. Guess I’ll b first hopefully get started in 2-3 weeks. I’ll post pics as soon as done.

[08sv211]

Sold

[beamons]

Post pics when you have it done. I am excited to see it.


Sent from my iPhone using PLT Nautique

[homer12]

Dave, thanks for the sale here - received the tower in good hands here!

[08sv211]

Ok after Daughters graduation and a college orientation trip to TCU the tower swap is finally complete. Roswell recommended 3-5” from windshield but that wasn’t going to work on the 211 so we mounted it in the area the step pads were. We ground the lip off and built the area up so the OEM mount would sit flat on gunnel. Then reinforced with an alum plate on bottom side. Then needed to repair the 4 mounting points from old tower.
Added Roswell racks and swivels and a pair of Neptune Speakers with a dual zone control installed in cigarette lighter hole. Made a few calls to Roswell customer service for help during the process customer service was good. Hope to get it in the water tomorrow.