OJ 16x15 Prop for 2013-15 550 Engine

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Bevostein
    Senior Member of PLANETNAUTIQUE
    • Jun 2008
    • 521

    • Frisco, TX

    • 2021 G23 2019 G23 (Sold) 2013 G25 550XR (Sold) 2009 216V (Sold)

    OJ 16x15 Prop for 2013-15 550 Engine

    I repropped my 2013 G25 with a 550 with an OJ 16x15. Recently traded in the boat and put the stock one back on before it went to the dealer so I am selling the OJ prop.

    There was a lengthy PN thread discussing which prop might be best for the 2013-2015 G boats with the 550 and the 1.5:1 gear reduction (not the 2:1). Here is the thread https://www.planetnautique.com/vb5/f...-boats-finally

    Important - This prop is sized to fit the 1.25 shaft diameter not the 1 1/8 shafts originally equipped on the 2013 models. Nautique went to the larger shaft in 2014 to address shaft failures.I didn't have a failure on my 2013 but mine was replaced proactively and under warranty by my dealer.

    Prop was installed July 2017 and probably saw 120 hours of use. I saw a minimum 300 reduction in RPMs in all activities and the prop could push a boatload of people and ballast. Loved it.

    Prop is in perfect operating condition. Never struck anything, no dings, no repairs, no twisted ropes, nothing....New cost was $750

    Will sell for $500 shipped to you.
    Attached Files
    Last edited by Bevostein; 01-10-2019, 01:35 PM.
  • Bevostein
    Senior Member of PLANETNAUTIQUE
    • Jun 2008
    • 521

    • Frisco, TX

    • 2021 G23 2019 G23 (Sold) 2013 G25 550XR (Sold) 2009 216V (Sold)

    #2
    Bump

    Comment

    • Bevostein
      Senior Member of PLANETNAUTIQUE
      • Jun 2008
      • 521

      • Frisco, TX

      • 2021 G23 2019 G23 (Sold) 2013 G25 550XR (Sold) 2009 216V (Sold)

      #3
      Bump. Must be someone that picked up a new to them G25 with the 550. Great prop

      Comment

      Working...
      X