Tweet
PCM 330 (2005) ECU, Throttle Body, Wiring Harness, Flame Arrestor.
From a 2005 Ski Nautique 196 Limited.
$850 for everything.
I have converted my PCM 330 to a EX 343 for Zero Off.
These are all the parts that were replaced and are now for sale.
The boat was running great when I started the conversion.
ECU - the sticker on side reads "33193." The sticker on the bottom reads "Delphi 12584052 MEFI-4." The bracket that holds the ECU on the motor is included.
Throttle Body - no stickers. Note, the orange seal to the motor is in excellent condition. The bracket that holds the throttle cable on the motor is included.
Wiring Harness -
The only sensor that I did not reuse was the water temperature (I think); this sensor is included, all other sensors are not.
The only wire I cut when removing was to the alternator, but the connector is included, just wire it back in.
The brackets that hold the wiring harness on the back of the motor are included.
Various bolts are included.
All parts are clean and working when removed.
From a 2005 Ski Nautique 196 Limited.
$850 for everything.
I have converted my PCM 330 to a EX 343 for Zero Off.
These are all the parts that were replaced and are now for sale.
The boat was running great when I started the conversion.
ECU - the sticker on side reads "33193." The sticker on the bottom reads "Delphi 12584052 MEFI-4." The bracket that holds the ECU on the motor is included.
Throttle Body - no stickers. Note, the orange seal to the motor is in excellent condition. The bracket that holds the throttle cable on the motor is included.
Wiring Harness -
The only sensor that I did not reuse was the water temperature (I think); this sensor is included, all other sensors are not.
The only wire I cut when removing was to the alternator, but the connector is included, just wire it back in.
The brackets that hold the wiring harness on the back of the motor are included.
Various bolts are included.
All parts are clean and working when removed.
Comment