SOLD - 230 Removable bench seat for sale $500 OBO

[Miljack]

I have a bench seat for a 230/236, model years 2007-2013. It's bench part only, but you can buy brackets if you want the back rest. This is taking room in my garage, make an offer I can't refuse!

[TexasTom]

Could i get some measurements on this? post to post, and overall width? maybe i could make this worl for my 220

[Miljack]

post-post c-c is 37 1/4"
width overall is 44"
Depth 17 1/4"

It's most likely wider than a 220 due to the "humps" in the 220. you could cut it down but would need a bandsaw due to the aluminum CC puts in the seats for screw support.

[tignini]

Tom, make sure to measure the metal posts to the back of back rest on your boat!

[TexasTom]

I wish i was at home so i could, im working about 300 miles away. im going to try to find those measurements online, probably a stretch though!

[Miljack]

I have a friend with a 220, I'll see what I can learn.

[tignini]

TexasTom I will check my boat here in a few and get back to you.

[TexasTom]

awesome, thanks!

Im sort of confused, I’ve looked up 230 seats to get dimensions but they all have a walk through step. This one doesnt. To clarify, this is the back seat the goes between the port and starboard seats right?

[tignini]

Post to post on the 220 is 35" and overall is right at 38.5",Depth is 18". Thats what I got on mine.

[Miljack]

230/236 have a removable bench seat that "snaps" in roughly midship. When you look at a 230/236, there are little platforms behind the captains chair where the bench snaps in. we use ours all the time, it's great for human "ballast" to clean up the wake.

[Miljack]

#30 is the seat

[TexasTom]

Oh, that makes sense! I was thinking it was like the 220 in that it moved back to front, but its completely standalone. I'd really like to make it works as I'm not having much luck finding one for sale. I wish there was a way to see how its built, to assure that cutting it down doesn't compromise it integrity. I'm gonna do some research and maybe we can make a deal on it. Did the backrest break or what?

[Miljack]

Let me know. This bench seat is heavy! I'm sure the base plate is thick, and CC usually puts/glues a layer of aluminum over the base so screws will have something to "bite" into. Foam is then glued over the aluminum. The machined posts are stainless and have lock nuts to secure them. It's stout.

[TexasTom]

Hey man! I think i might be able to make it work, its worth a ry at least but its gonna be a lot of work and ill have to buy a few things to complete it. How about 200 dollars and i pay the shipping?

[Miljack]

I'm going to wait to see if a 230 owner needs it. Thanks for the offer.