Retractable Transom Pylon - Group Buy

[flynn51]

Just picked up on this thread and buy, will this fit a 211 if so i"m in.

[tachyon]

Flynn51, I'd have to see some photos and measurements. If you can check with the PDF CAD print in this thread and see if your dimensions fall within the proper range, that will be a good start. Unfortunately I don't have any 211's around that I can go and check in person.

I will PM the rest of the group today with further details - below is the final list:

1. Super01 2001 SAN
2. Echolodge 1999 SS
3. MNSuperAir 2001 SAN
4. OUT ----> Chexi 2000 SAN
5. Garrettaday 2002SANTE
6. GoBig 2003 SAN

[EchoLodge]

For those with 99's I measured and found my cross-member bar to be 12 inches and not the 9.75 as required. Rick is checking to see if it will work for me!

[sjames]

I want in

I am going to re-measure as I came up with 24in from the bottom rail to the top of the deck for my 2006 220 SANTE. I need to get the second dimension for the mid bar.

[intrlaz]

I am interested, just need to take the measurements. Also, mine will be used in brackish water. Will the hardware be stainless?

[intrlaz]

My 2002 Sante is within the measurements specified. If the buy is still open I'm in.

[super01]

I'm sure that Rick will be happy to have your order. Have you contacted him?

[EchoLodge]

12 not 9.75 for me! Any update Rick?

Tapatalk from my ICS Epic 4G

[intrlaz]

Contacted Rick by phone earlier today but got voicemail. Would love to get in on this.

[tachyon]

Intrlaz - I picked up your voicemail tonight, no problem, we can definitely get you in, may be easiest to send paypal to sales@tachyonmotorsports.com with payment. Be sure to indicate 'intrlaz' in the notes so I can keep my records correct, and please include a phone number as well.

As far as the brackish water question, the hardware is all stainless steel that comes with the pylon. The unit is all black anodized as well for the aluminum parts. I think you will be in good shape!

I am going to check some dimensions to respond to a few emails from earlier today, and also to address the 12" question above...

Thanks!

[tachyon]

Echolodge - I just checked, and the highest point of the upper 'u-bolt' can be up to 12" above the horizontal member that the bottom of the pylon sits on.

While the photo is a bit out of focus, from what I see, you are in good shape!

[tachyon]

Sjames - I can certainly make up a taller unit for your boat - but I will need some additional information to make sure I get all of the details correct. Please shoot me an email or PM once you determine the position of the upper cross-member.

Thanks!

[EchoLodge]

Echolodge - I just checked, and the highest point of the upper 'u-bolt' can be up to 12" above the horizontal member that the bottom of the pylon sits on.

While the photo is a bit out of focus, from what I see, you are in good shape!

You were going to send me a jpg from solidworks so I could see what you were talking about ref the clearance issue I may have. Did you still want to do that so I can double check? Or do you feel good about my measurement?

Tapatalk from my ICS Epic 4G

[intrlaz]

Intrlaz - I picked up your voicemail tonight, no problem, we can definitely get you in, may be easiest to send paypal to sales@tachyonmotorsports.com with payment. Be sure to indicate 'intrlaz' in the notes so I can keep my records correct, and please include a phone number as well.

As far as the brackish water question, the hardware is all stainless steel that comes with the pylon. The unit is all black anodized as well for the aluminum parts. I think you will be in good shape!

I am going to check some dimensions to respond to a few emails from earlier today, and also to address the 12" question above...

Thanks!

Thanks Rick. Payment sent

[tachyon]

Echolodge - just sent the 3-D CAD pics - check your email.

Thanks!


Rick