Possible Custom Flyhigh sac group buy

[phantom268]

Let me know as soon as you find out. I took some measurements of my front in-floor locker this wknd and it appears to be something like 72x22x10 give or take. Anything close to that will do to get alot more weight than most preset sizes.

[rbalan]

I talked with Flyhigh today, they ended up being set on the prices given. So if you want a 21*68*10" custom sac, you're looking at $220. Thanks for everyones interest, sorry it could not work out!

[99flightcontrol]

what size sac would you recomend placing on top of the factory tanks and is it ok to put a load on them?

[MNSuperAir]

what size sac would you recomend placing on top of the factory tanks and is it ok to put a load on them?

I have an SAN and the Fly High Nautique v-drive wedge sacks fit great.

[aarond0083]

I am having a pair of rear sacs in yellow custom made for my 2007 210. 36" x 16" x 12" with the same valve configuration as the tube sac. Basically add 10 inches in length and 2 inches in height to the tube sac, then cut it in half. $400 for the pair. I tried using the X2 Sacs and they were a little too wide and definitely too tall. Also, an extra 900 lbs. is too much in the rear of my boat. I am guessing my new sacs will be about 550 lbs. - 600 lbs. when full. and will still allow me to store vests, etc. on top of them.