Trakker U-Bolt on a CC Pylon

[east tx skier]

I've got an older Trakker camera mount and when I tried to put it on my 98 SN, the U-bolt wasn't long enough (not as much taper on my CC pylon as I had before). I checked several places yesterday (Lowe's, Auto Zone, Pep Boys), but couldn't find a match in a longer U-Bolt.

Has anyone else been through this hunt? Where did you end up finding a replacement? What length/diameter do I ask for?

[darrel409]

RE: Trakker U-Bolt on a CC Pylon

how about a muffler shop, should have large u-bolts from 3+ inch exhaust

[bkhallpass]

RE: Trakker U-Bolt on a CC Pylon

You might try Bryan at Ski Pro Accessories (maker of the Trakker). He should have some insight. He's experimented with thousands of configurations. If you can't reach him, let me know and I'll call him. I've known him for almost 20 years now. In fact, I was driving the boat when he tested the first prototype. BKH

[Edwin]

RE: Trakker U-Bolt on a CC Pylon

Check your PM east TX skier...

[Andrew]

RE: Trakker U-Bolt on a CC Pylon

easiest thing to do would be to find a shop that will bend up a custom bolt for ya......

[east tx skier]

Thanks everyone. We're heading to the lake tonight and will be back on Sunday. So I'll resume my search then. Probably best not to have video of those first few sets when I'm still knocking the dust off.

[Andrew]

those are the best vids!
nobody wants to see u nailing a trick that everyone is doing.......... but we all wanna see u eat it big time! lol

[east tx skier]

Well, I got tired and out in front and almost had one of those memorexable yard sales, but not quite. Thanks to Edwin who is hooking me up with the part I need and everyone else who helped out with info.