New tower for 98 Air Nautique

[Jesse13]

Can anyone recommend a tower thats somewhat inexpensive (1000-2000) that can mount in the holes from the stock tower?

Is it a big pain/expense to fill the old holes if I cant find a tower to mount in the existing holes?

[darrel409]

RE: New tower for 98 Air Nautique

the only tower that will mount in the same holes is the generation 1 you removed, if lucky...you may be able to cover one set (front or back) with another model tower. A gel repair kit is relatively inexpensive prob less than $30.

[Miljack]

I put a New Dimension tower on my 99 Pro Air. The front mounting feet will cover the old setup, but you will need to fill the old bolt holes. The rears are completely different. I covered my old holes with fiberglass, but didn't bother trying to match the gelcoat, I just covered that area with the Nautique Sano pad.

[Jesse13]

Miljack,

What is a Nautique Sano Pad? Where can I find it?

Jesse

[Miljack]

It's the traction pad that CC uses on the newer boats. Look on the composite platforms, and do a search here on Sano pad. Your dealer should be able to order a sheet of it for you. It's expensive, and there are other traction pads to look at it if you don't have to have Nautique stuff.