Additional rack

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • speedislife
    • Mar 2008
    • 7

    • Beaver Lake Arkansas


    Additional rack

    We are in need of an additional board rack for an '08 210 with the flight control tower. We currently have two spinner racks but need an additional one for a wakeskate and small wakesurf. The boards that we'll put in this one will be fairly light so I was thinking a flight clip mounted higher than normal. I would like to be able to mount the rack without drilling holes.
  • speedislife
    • Mar 2008
    • 7

    • Beaver Lake Arkansas


    #2
    RE: Additional rack

    Actually I hit post before I asked the question. Where can I get a used flight clip, or if anyone has suggestions on a rack I would appreciate it.

    Comment

    • tmb
      Senior Member of PLANETNAUTIQUE
      • Mar 2004
      • 616

      • Midwest

      • '22 GS 22 ‘12 200

      #3
      RE: Additional rack

      I ran into the problem of those spinner racks not being wide enough for the surfboard. My CC dealer is looking into swapping out 1 of my racks and replacing it with the wakesurf forks.
      '18 SAN 210 Reef Blue/Admiral Blue Metal Flake
      '12 SAN 210 TE Black/Masters Blue
      '09 SAN 210 TE Black/Fury Red
      '08 Air 216 TE
      '02 Air 216
      '98 Sport Nautique
      '89 MC Prostar 190

      Comment

      • SuperSquirt
        Senior Member of PLANETNAUTIQUE
        • Apr 2008
        • 534

        • Tennessee

        • 2008 SANTE 210

        #4
        RE: Additional rack

        I currently have two flight clips for the Titan tower, and I would sell them if I could find the Titan spinner racks to replace them with.

        Comment

        • Laptom
          Senior Member of PLANETNAUTIQUE
          • Oct 2003
          • 876

          • Eindhoven, Netherlands


          #5
          RE: Additional rack

          We use the flightclips for the surfboards and additional wakeboards. And we have the spinners for the normal wakeboards. The flightclips are working perfect with the spinner. It's great to store 8 boards in the tower. For the flight clips are brackets availeble so you can attach them without drilling. The can fit the horizontal bracket on the side of the tower or on the bracket above the tower.
          230 with ZR6 running on propane

          Comment

          Working...
          X