Mounting a pylon in a 2006 super air nautique 210 TE

[ederaaff210]

Hello CC fans,
I want to buy a 2006 super air nautique 210 TE but doesn't have a pylon at the rear side. Is it possible to install it there? Do you know where to buy. We want to do a little bit of slalom and parasailing behind the boat and I don't want to do that behind the tower.

Thanks for your help

[AuMDLST]

RE: Mounting a pylon in a 2006 super air nautique 210 TE

Might be possible to add the pole. I do not think you are going to appreciate the 210 if you are on a single stick cutting through the wake at any reasonable slalom speed.

[NautiqueJeff]

RE: Mounting a pylon in a 2006 super air nautique 210 TE

I am pretty sure I have heard of dealers installing the optional pylon after the boat has been delivered. Check with your dealer, but I am pretty sure it can be done.

[DanielC]

RE: Mounting a pylon in a 2006 super air nautique 210 TE

Given enough time and money, anything can be done. It might be cheaper to get a boat with a pylon already in it. I believe the motor frame has the pylon mount welded to it. It might require removing the motor, and v-drive from the boat, removing the motor frame, adding the pylon mount to the frame, and putting everything back together.

[ederaaff210]

RE: Mounting a pylon in a 2006 super air nautique 210 TE

Just to inform all readers of this forum: I've received information that it is possible without welding. I also received the complete information how to do this. But the advises were to let a dealer do the work.....

[wake_fun]

Installing Pylon

Here you go :mrgreen:

[Spencermo]

I know that this thread is old but does anyone know how to do this or have a document that explains how to?

thanks