bilge

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • jward
    Senior Member of PLANETNAUTIQUE
    • Feb 2008
    • 620

    • Sweet Home Alabama

    • 03 SANTE 04 SANTE

    bilge

    When I bought my boat there were a few things not working and I have fixed everything except one. My rear bildge is not working. The front works fine and I am assuming that they tie in somewhere since they turn on using the same button. Also when I turn on the bildge I can hear it in my speakers. Can anyone lead me in a direction to help resolve this. I figure if I fix the bilge issue it should clean up the stereo thing as well. By the way the bilge is brand new and the boat is a 2003 SANTE.
    Thanks
    Justin
  • AirTool
    1,000 Post Club Member
    • Sep 2007
    • 4049

    • Katy, Texas


    #2
    RE: bilge

    My rear bildge wasn't working.....I'm not going to tell you about all the work I did. But after all the work was over and the new pump didn't work, I found that one of the pins on the harness side (not pump side) had slipped back in the casing and wasn't connecting. I pulled it out from the back, bent the tang up a bit, then pushed it back it.

    Problem solved.

    AirTool

    Comment

    Working...
    X