Nautique Graphic - Letter "A" 2000 SAN

[SANCasey]

I am looking for the Letter "A" in Air on a 2000 SAN. It is in the graphic on the side of the boat towards the stern. It is white in color.

I checked at the dealer, but it was $165 because it is only sold as a complete new graphic. Just thought I would check here to see if anyone purchased the whole graphic for a different letter and will sell me the "A".

Thanks.

[N2Orbit]

I wish you would of asked this yesterday. I just removed my decals and throw them away. I do have a brand new Super air nautique logo for a 2001 SAN, I believe it is the same one you have. Make me a resonable offer.

[pythonsupersport]

Post a picture and I might be able to help you. I have 2000 super sport and I think the lettters are 'domed' in a similar style.

[SANCasey]

I will try to get an upclose picture this week. The letter is 1 5/8" tall by 2 3/4" wide.

Thank you.

[AirTool]

Can you go to a sign / sticker company with a tracing from the other side and have them cut you one?

I've heard the technology in the sticker biz is amazing.

AirTool

[NautiqueJeff]

I also have a piece of the rear graphic from a SAN of about that year. Let's see a picture. I might have just what you need.

[Chad52]

SANCasey,

I did have an "A" but it was for a '03 graphic. It measured 1 3/8" heigh by 2 3/8" wide. Sorry.

Chad

[Latonkaboarder]

Check with the navigation company. They used to be a nautique dealer and have some decals laying around. Last time I was there I saw a few nautique logos hanning on a door to the back uposterly room and was going to by one to put on my vehicle but the one I saw was missing some numbers. These were to decals that are domed and are designed to go on the boat. Not sure if it was the same one you are looking for but give them a call. Ask for Jim Chewy and tell him you were referred by me (Chad Warholic). Jim should be able to help you out if they have the grafics you are looking for and I imagine you could get it at a resonable cost since it is not the whole decal. www.navcompany.com 814-382-3255.

[SANCasey]

I will try to get a picture of it tonight and post. I appreciate everyone's replies.

Thanks,

CW

[SANCasey]

Here are some pictures.

[AirTool]

I'm still thinking you should be able to get that done a decal shop. I've seen where you can make a sketch on the computer and a laser cuts the graphic out of a film. You could make a pencil rubbing of the other side and let them flip it on the PC.

AirTool

[MHayes]

I'm still thinking you should be able to get that done a decal shop. I've seen where you can make a sketch on the computer and a laser cuts the graphic out of a film. You could make a pencil rubbing of the other side and let them flip it on the PC.

AirTool

They are raised graphics and I would imagine a shop would charge you a pretty good bit just to produce one "A".

[SANCasey]

The Navigation Company had a graphic, but it was the wrong size.

I guess I will look up some sign companies, but I really think they are going to be pricey.

[AirTool]

I'm still thinking you should be able to get that done a decal shop. I've seen where you can make a sketch on the computer and a laser cuts the graphic out of a film. You could make a pencil rubbing of the other side and let them flip it on the PC.

AirTool

They are raised graphics and I would imagine a shop would charge you a pretty good bit just to produce one "A".

Agree...I didn't know it was raised.

AirTool