Welcome to PLANETNAUTIQUE! We're glad you're here. In order to participate in our discussions, you must register for a free account. With over 25,000 registered members already, we would love to have you as a member too! Click here to access our Registration Page. Registration is quick and easy, and we keep any information you give us completely confidential. Once registered, you may sign in using the drop-down Login or Sign Up window at the upper right corner of the site.
I have 2005 206 air nautique and i was thinking about putting a hydro gate on. I was wondering what it would do for my wake (bigger, smaller, harder, flatter) and how the price range would be.
a wedge is a slight down-angled wing that pulls the back of the boat down. Basically adding more downforce to the back of the boat to mimic adding more weight to the back of the boat.
the hydrogate will not make a difference in making the wake bigger. It will only change the table surface and the lip of the wake. Unless you are a trick skier, I would say to skip adding this feature.
a wedge is a slight down-angled wing that pulls the back of the boat down. Basically adding more downforce to the back of the boat to mimic adding more weight to the back of the boat.
While I don't think Malibu does a good job reinforcing the transom for the wedge, I do like the concept and application. I can't understand how so many people put gallons/thousands of pounds of water INSIDE of their boat. I am not a fan of water in the boat. It seems that there is a better way to make a wake boat by design that doesn't require ballast.
By way of comparison, early inboards had a very small wake from the onset. There have been many improvements, but an 1980 CC or MC still puts out a small wake; even by today's standards.
i don't know.....i think the more weight in the boat...the deeper the boat sits in the water....thus the larger the wake.....a wedge pulls the boat into the water putting all the pressure at the connection mounting points....at least water ballast is usually well distributed along the boat....thus less stressfull to the boat. However, an efficient/easy/quick to use ballast system is essential, and I think all boat mfgrs can improve here.
I've owned the bu/wedge and the tige'/taps systems....and now i got a CC, which has a better wakeboarding wake (IMO), mainly because of hull design and built in ballast.
Comment