What mod should I do next?????

[kevfran99]

I like personalizing my boat. I have done the things listed in my sig but have run out of ideas. I have a few things not listed like: fiberglass enclosure for the sub and leds in the vents. What can I do next? I need some ideas! Thanks for your input!


oh, and I not into the interior leds......they just don't do anything for me.

[CradGen2]

RE: What mod should I do next?????

Kevin,

Got your clamps. Thanks for the easy transaction.
I'd do LED on the interior, lady's and wives like it, so at the end of the day you might like it too.

What about LEDs on the trailer? It will look nice going down the road.

Powder coating always looks good too. Grab rails. Also I saw tower speakers coated red to match the boat and it looked good.

[DanielC]

I use my heater way more often than a hot water shower.

[210GA]

Make a bracket up near the tower light and mount a huge American flag to it and fly that around.

Have you put LED's in the side vents yet?

[kevfran99]

Make a bracket up near the tower light and mount a huge American flag to it and fly that around.

Have you put LED's in the side vents yet?

LMAO.....That would make me a real BIG redneck!

nah, it rained last weekend. I plan on installing the sub enclosure and the vent leds friday.

[Suicidal-Element]

Flush mount LED's in the gelcoat under your boat so you can light up the lake under your boat!!!!!

[apexrig1]

Fresh air exhaust? WS420? More ballast?

[gride300]

you'd only be a redneck if it were a rebel flag, which would be hilarious. i'd go w/ sub enclosure or 420. i agree that interior led's are pretty sick. i don't even use my boat at night EVER and i have some.

[kevfran99]

Fresh air exhaust? WS420? More ballast?

Thought about the exhaust......but I'm still on the fence about that one! don't need a 420 because I already have a volume knob that turns off the interior speakers and leaves only the tower on........as far as ballast goes I have an additional 900 lbs

maybe I will just have to do the interior leds around the speakers and in the cup holders. hmmmm

[kevfran99]

you'd only be a redneck if it were a rebel flag, which would be hilarious. i'd go w/ sub enclosure or 420. i agree that interior led's are pretty sick. i don't even use my boat at night EVER and i have some.

I'm installing the sub enclosure friday

[bradb]

I'm just finishing adding heated seats to my '94 nautique. I believe it is an option on the new malibus, and it should be nice on those cold mornings and evenings.

[kevfran99]

I'm just finishing adding heated seats to my '94 nautique. I believe it is an option on the new malibus, and it should be nice on those cold mornings and evenings.

now that's what I'm talking about......how the he** did you do that?????

[Nautiquehunter]

I'm just finishing adding heated seats to my '94 nautique. I believe it is an option on the new malibus, and it should be nice on those cold mornings and evenings.

Brad
Where did you get the heated seats? Was it difficult to install?
Can you post some pics of your project?

[bradb]

http://www.heatedseatkits.com/index.html.

I ordered the H3 kit - 3 of them... 1 for the driver bottom and back, and 2 for the rear facing observer seat.
Search for that same kit on e-bay and you can get it for about 80$ a seat.

They are fairly easy to install. I was getting a bit of the upholstery done anyways, so those skins were already removed. The other seats, I pulled the staples and added the pads.
I wired them through a relay that is switched from the keyed power so that they turn off when the key goes off.
They come with some nice switches that I mounted in the dash.

I don't have any other pics, but I can take some if you let me know what you want to see.
I don't have everything quite finished yet, because I don't have all my upholstery back from the shop. I've tested the passenger seat bottom and it works GREAT!

[210GA]

Kev, I think your boat would look sick with the Chromax letters on it!!