210 props

[ren210]

hey just wanting to find out if it is possible to run a 14.5x.14.25 OJ prop on a post 07 210? ours currently has a 13.5 and we are after a quicker holeshot, have heard rumours that it is not possible too use the bigger props on 210's... can anyone point me in the right direction??

any help appreciated, thanks

[migs]

ACME 1465 is what you need - my dealer recommends - says the new 210's either come with the 645 or 1465 - more hole shot with the 1465, more top end with the 645.

[robertsmcfarland]

I run a 1235 acme which is a 14 inch dia prop . It replaced a 13 inch 1579 power prop which came with my 2008 210. Hole shot much improved while lowing the rpm by over 500rpm to 3100 at 23.5 mph with 2500 pounds on top of the standard ballast. I have the 6.0 motor.

[kevfran99]

I run a 1235 acme which is a 14 inch dia prop . It replaced a 13 inch 1579 power prop which came with my 2008 210. Hole shot much improved while lowing the rpm by over 500rpm to 3100 at 23.5 mph with 2500 pounds on top of the standard ballast. I have the 6.0 motor.

how much did this kill your top end?

[MNSuperAir]

Ren, what year 210 do your have? The 2006 and before you have to use the smaller props. I don't remember the diameter but call ACME and they can point you in the right direction. I have run both the 644 and 856 on my 2001 SAN. If I remember correctly, ACME came out with a few newer and better props since I bought those.

[ren210]

MN super air, its a 09 model 210, we have a spare OJ 14.25x14.5 that we are thinking of trying on it. I've heard rumour that
bigger props don't work on the 210's but also have heard that Oj's do work? does anybody know fact?

[robertsmcfarland]

top end

Kevfran, didn't notice any reduction in top end speed but only run it at top end when running back to the dock because of a thunder storm.