I don't know how to start my 03 SAN

[Bimmerboyz]

This is pretty embarassing. I bought it last week and I wanted to test a few things. THe owner showed me how to start it. Press 9/0 3 times and push start. I have tried this a few times with no luck. I printed out the manual and it really doesn't help. Any quick help would be appreciated.

[gride300]

1. make sure kill switch is attached.
2. make sure toggle switch is in on position aka flipped up
3. make sure battery switch is on
4. type in code press start, then press and hold to start.
-everyone i know has used 4 digits for the code. i'm not sure if it's required. try pressing it 4 times.

hope that helps

[jr49erfan1]

Dont know if your 03 is like my 05, but my code is 4 numbers long, sounds like you need a fourth 0/9. Also make sure your battery is on (if it/they are on swithches) and the power toggle is on "all on". Also is the clip on your killwitch connected?

If all that doesnt get you running, email your seller. Nice boat BTW.

[jr49erfan1]

Dang gride, you beat me to all points!!! I must have been typing my relpy when you posted.

[Bimmerboyz]

Toggle switch. I feel special. Thank you I figured it out.

[gride300]

it happens to the best of us.

[bkhallpass]

You are not the first. That toggle switch acts like a master power to the boat. I believe if you flip it up half way, the auto bildge will work, but no power to anything else. BKH

[seanxtreme3000]

HAHA That toggle switch got me too on thursday lol