Clamp spacers

[Lvnspeed]

I have a set of flight clips that mount to the tube of the tower but they are for a 2 1/2" tube and my tower tube is 2" has anyone found or mad a spacer to in the clamp so these will work on my tower?

[Lvnspeed]

any suggestions? Or am I going to have to sell the Nautique (board racks) Spinners and get something that fits my tower tubes?

[rubclt]

Maybe a clear hose as a spacer...

[larryswift]

Clamps

I went through the same process and I feel your pain. I bought some Fundemental Design Racks and adapted Monster Tower Spacers to fit my tower. I think the adapters kits were $25.00 for each side. They have been mounted for 2 Years and the spacers work great. I think your tower is 1 7/8". I know that is the size of the tower on my is 2005 Super Air TE.

I was thinking about putting the OEM Spinners on my tower as well and when I was doing my research I emailed the OEM supplier (I think Skylon) and they said them might be able to machine an adapter sleeve/spacer for a nominal charge. Just an option.

In any event a good file and patience will make your project go smooth.

[Lvnspeed]

Definatly not Skylon I called them.

[xlair]

They were titan racks but titan was bought by malibu. the new titan is menace i think. not sure if they will be of any help.

[Lvnspeed]

Anyone know what the diameter of tube is my tower?

[shag]

You can look at www.bulletlines.com, someone guided me there today for the very same thing. Look under other accessories. Very inexpensive too. You probably have 1 7/8".

[seth]

The 2000 FCT is 1 7/8".

[Lvnspeed]

You can look at www.bulletlines.com, someone guided me there today for the very same thing. Look under other accessories. Very inexpensive too. You probably have 1 7/8".

Thank you this was exactly what I needed