docking lights and gauge lights not working.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • keegan
    • Mar 2011
    • 66

    • vancouver, BC


    #1

    docking lights and gauge lights not working.

    last time i took out my 07 SANTE 220 it was getting dark. i tried to turn on all my lights. everything came on as normal except the docking lights on either side of the bow and the upper gauge lights (tach, speedo, perfectpass, etc). the ballast gauge lights do come on.

    i have checked all breakers and fuses in the rear port locker and by the drivers feet.

    i started pulling things apart today and there is no power at the docking lights.

    has anyone run into this problem?

    thank you.
  • 210GA
    • Aug 2008
    • 282

    • Cartersville, Georgia

    • 2008 SANTE 210

    #2
    Not sure, but on ours you have to press in the button and hold it a few seconds for them to come on.

    The one on your dash may just be blow since all the others are working.

    Comment

    • NautiUT
      • Mar 2009
      • 67



      #3
      Press and hold the interior light button down for a few seconds. The docking lights will come on at that time.

      The contrast for the dash lights is the up and down arrows on the rpm gauge.

      Good luck!

      Comment

      • keegan
        • Mar 2011
        • 66

        • vancouver, BC


        #4
        absolutely amazing info. thank you very much. i would have never figured that out with out you.

        -thanks again

        Comment

        • Nautiquefamily
          • Feb 2013
          • 22

          • California

          • 08' 220

          #5
          Awesome info. have an 08' 220 and could not for the life of me figure out how those **** things came on and off. 6 years of night time docking frustration. much appreciated!

          Comment

          Working...
          X