Will these OEM spinner racks fit on my tower?

[shonuff]

I'm looking at these OEM spinner racks for my '05 SANTE 210.


http://www.nautiqueparts.com/spinner...ushbutton.aspx

It says it will fit 210's from 2007-2008, FCT1 only. I get the different generation FCT towers confused. I thought FCT1 was around '99 and I thought I had an FCT2 on my '05 so I'm confused about why '07-'08 210 towers are called FCT1 again.

Does anyone know if these will fit on my tower? It doesn't list the clamp diameter.

Thanks!

[NautiqueJeff]

Might be a good idea to call them on this one. They'll be able to tell you in about two seconds.

[EchoLodge]

I believe the newer tower is made out of a larger diameter pipe. The good news is you can line the collar with rubber (radiator hose) to make it fit your smaller diameter pipe. I had to do this to get my swivel comptech foil rack to fit my tower. The collar for my rack is for a 2 inch tower and my old school tower is 1.5. It is working perfect and holding my 40 lb hydrofoil with easy. The rubber also protects your tower from marks.

[shonuff]

I spoke to the guys at White Lake. As usual they were very helpful. There are two versions of these OEM spinner racks and yes, one of them will fit the FCT on my '05 210 with 1 7/8" tubing. So for anyone with the same generation FCT as mine, you have an OEM alternative to the flight clips!

[riderite]

I have all the mounting hardware you will need for those rack, from new rockets to level out the rack to different size CBC & TC clamps....