wake surfing behind a 210

[clydesy]

hey all. i have recently bought a 2009 san 210, im having trouble with the wake surf wave on the drivers side. i have the fly high additional ballest system on top of the standard system.
i was wanting to know how you all weight your boat and what speed you surf at.
thanks

[Nautiquehunter]

The starboard side will never be as good as the port because of prop rotation. I use the full starboard tank plus 400lbs additional and fill center full then set ZO to 10mph .

[Andrew14]

My 2008 210 starboard surfwake is better than my port....but both are pretty awesome. Try full factory and full fligh high on your starboard....empty all port ballast. Then fill the factory belly tank full....put the zero off on 9.8. It should be pretty good then.

[airhuck]

i have an 09 210. we surf with full factory port and belly, 400 on top of factory port rear, 500#s on port side middle seat, then everyone sitting on the port side.

[johnboyy7]

any pics of yalls waves? would like to see how tall and long they are. what total weight is that in the lockers?

[clydesy]

thanks for the help guys

[krt]

any pics of yalls waves? would like to see how tall and long they are. what total weight is that in the lockers?

Still a work in process on our 210 but here is video of my kids, had 3 people in the boat, full belly, full port with 400lb bag on top and no water in the other tank or bag.
Adding arrow bag and more weight port side forward. When we had 7 people in the boat, mostly on the port side the wave got bigger and longer.

http://www.youtube.com/watch?v=N15gO..._order&list=UL

[Sac Surfer]

I run Port side only so far just got the boat in June, so getting my wave dialed in as well.
Here is the #750 I added on top of the factory.

This pic doesn't have the bow sac that I added later in July.
Only 2 people in the boat.

and the saddest day of the year, winterizing.

[HS]

Sac Surfer: any siphon through the vent line on that 750 or did you install an anti siphon valve?

I was looking at the wakemakers site and read a review from someone who installed an Enzo surf sac in a 210---anyone here have experience with that sac?

[n3]

11 210
Removed the rear tank and installed 1k bag from FH, bow tank, belly bag, and bow integrated. 6 people in the boat at around 10mph on ZO. I also think the gate was at 2. 210 is an awesome surf boat.

Thanks,
Mark @ N3

[dougofKC]

drain all the factory tanks except the rear star. Add 250-1,000lbs in on top of rear star side. Set gate to 2 and Zero Off to 9.8 Ours will roll a 3-4 footer with this config.

[HS]

11 210
Removed the rear tank and installed 1k bag from FH, bow tank, belly bag, and bow integrated. 6 people in the boat at around 10mph on ZO. I also think the gate was at 2. 210 is an awesome surf boat.

Thanks,
Mark @ N3

Nice! That has to be one of the best surf waves I have seen for wakesurfing!

The Enzo mght produce a lot of uneeded list...

I am thinking that the pocket is deep and long, and clean due to the bow and belly sacs.

Is that the 650 lb. Arrow sac in the belly (FLy High #721) plus the 725 lb. Integrated Bow sac (Fly High #711)?

Do you need to cover the vent?

[Chad52]

I think my 08 210 throws up a great wake on the starboard side, you just have to weight it like the previous posters have described...

BTW, I think there are some unusal photography angles going on in these pics. That's me surfing, and the boat is not below the water line as the pics looks...

Chad

[ccs]

N3 - now thats a nice surf wake !!

[johnboyy7]

chad do you have any other pics of the wake from in the boat?