Trailer Plans?

[moto132]

I am looking at a 210 SAN with no trailer. Closest trailer company to me in Washington is EZ Loader. Since i haven't had any luck searching for used trailers i was going to have them build me one. My question is, are there any plans i can get or any measurements i need to give them besides beam, transom to bow, and weight? (which i already gave them) I dont want to custom order a trailer and have it not fit the boat. Any help would be appreciated.

[Nautiquehunter]

Have you gone to your local dealer ? Im sure they can get you one.

[ccs]

moto ---

Im sure most all major trailer companies have the Nautique specs for a 210 trailer -- but I can assure you if you go with Ram-Lin or Phoenixx they know exactly how to build a trailer to fit a Nautique 210..

[2004196]

Ya moto, like nautiquehunter suggested, have you called Rob, Ron or Doug at Pacific Nautiques? Should be no problem in getting you the specific trailer you need. EZ Loader is a pretty good trailer but wouldn't be my first choice for a Nautique, maybe a Bayliner or Sea Ray but not a Nautique. I'd probably put my neighbors Mastercraft on an EZ Loader!

[jonfo]

yes, call rob at pacific, he will give you a ton of info...

[moto132]

Ive been in constant contact with Rob and Ron the past few months while ive been looking for a boat. Found this one with no trailer and was seeing what i could get a trailer for. Ron said about 4600 for a Ryan and i could get an EZ loader for about 2800. After talking to Ron about the qualities of EZ loader i decided to go a different route and pass on this boat. By the time im into it with a trailer and have it set up how i want it, it will cost me more then if i waited and found the perfect boat.

[NautiDave07]

I had an ez loader on my 236. It was great but it was the upgraded illusion. Not sure how much this would very from the standard one besides the going. My old 210 was on a ramlin and it was great even after 7 years. I would call them directly. The wishbone ramlin is bar far the easiest trailer I have ever loaded a boat on to.