SeaDek Faux Teak for a 220 replacing carpet

[Fwat220]

I am looking for anyone who has installed faux teak made by SeaDek in thier 220 to replace the carpetting. I am trying to avoid creating a new pattern. Please help. Thanks

[aarond0083]

I haven't seen or heard about anyone doing an entire 220, only 210 and 230. Maybe someone will chime in.

[countiemountie]

I would like to do that in my SN 200.

[jonfo]

I just ordered it from my nautique dealer for my 07 220 swim deck and back of the boat. After that i was considering having them make it for the interior areas that currently have Sano pad on them. I like my snap out carpeted areas though, so likely will not replace carpet.

[AndrewC]

When the carpet is removed from my 2007 220, the fibreglass floor is all textured. How does this go with sticking down the new faux teak??

[aarond0083]

Andrew, SeaDek is a pressure applied adhesive so it installs just fine to the textured floor. No different that if it was smooth.

[raygunclan]

I have an 07 220 and want to replace all my sano and carpet with Seadek - Orlando Nautiques has put the request in but SeaDek has not responded. I have emailed SeaDek directly and they have not responded - started this process last summer

[HS]

I have an 07 220 and want to replace all my sano and carpet with Seadek - Orlando Nautiques has put the request in but SeaDek has not responded. I have emailed SeaDek directly and they have not responded - started this process last summer

The SANO at least can be handled by http://www.nautiqueparts.com/ They had sent me links for the 3 kits needed for a 210, so I would think they can do the same for your 220, send a note to orders@nautiqueparts.com for info and pricing!

[Fwat220]

Raygunclan,

My nautique dealer did get a response from SeaDek that said they do not have the pattern. That is why I am searching for a pattern. They did not get back with a cost yet either so my dealer is working on that too.

Hopefully someone shows up with the pattern. If not we have to reconsider moving forward depending on the cost.

[raygunclan]

let me know what you hear I wanted to drive my boat over to their location (1.5 - 2 hrs away ) and have them make the pattern for me (don't think they want me to) OR have my dealer make the pattern and install

[raygunclan]

The SANO at least can be handled by http://www.nautiqueparts.com/ They had sent me links for the 3 kits needed for a 210, so I would think they can do the same for your 220, send a note to orders@nautiqueparts.com for info and pricing!

Thanks HS - I've seen the sano replacement parts but really want to hold out and replace with the faux teak...would be great if I could "rent" the parts from nautiqueparts, send the sano and carpet to SeaDek and they create fauxtek from that

[Fwat220]

The only issue with pulling your carpet and sending it is the huge piece in the middle needs to be cut differently to allow you to pull that huge floor piece out.

[TxJole]

Have your dealer make a template for SeaDek, since you have to buy it from your dealer now anyway.

[HS]

Thanks HS - I've seen the sano replacement parts but really want to hold out and replace with the faux teak...would be great if I could "rent" the parts from nautiqueparts, send the sano and carpet to SeaDek and they create fauxtek from that

Sorry, I meant to say the SANO replacement with seadek can be handled by Nautiqueparts. They sent me links for the kits needed for a 210, so I would think they can also get them for your 220.

[raygunclan]

SeaDek got back to me. Once you turn in pattern takes 4 weeks for product.
I am asking them to look in their files because they should have the Sano patterns for 220, so I should not have to create patterns. I also mentioned to them I could drop my carpet off at their office to create a pattern off that Will keep y'all posted.