Tweet
I picked up a 2000 SAN last year and was too excited to do anything last summer. I'm now trying to do a few minor upgrades and modifications. The boat has the hardware mounted on the port side for a shower. I think the old owner disconnected it but never fully removed it. I'd like to finish the job and have the area for storage. Anything I need to know?
-
-
For a shower there are 2 hoses. One should be connected before (some people do after) the raw water pump. One is coming off the block for the hot water. If the previous owner disconnected both hoses and plugged the block and insert of the cold water hose, then you have nothing to worry about. Simply remove the control knob box and pump. That would be it!
Comment