200V w/FCT3 & Z5 Folded Going Under 8' Door

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • sodbuster88
    Senior Member of PLANETNAUTIQUE
    • Nov 2008
    • 368

    • Clayton, NC


    200V w/FCT3 & Z5 Folded Going Under 8' Door

    For anyone wondering if it works without taking the Z5 off the tower...it does..
    Attached Files
    Peace..
  • Montana Boat Guy
    Montana Boat Guy
    • Feb 2012
    • 112

    • Rockledge, FL


    #2
    Great to see it fits. The only exception would be variations from different trailer manufacturers. Different bunk set ups, tire/wheel sizes, or suspension systems could make boat sit higher than yours. Hope everyone is as lucky as you!

    Comment

    • Quinner
      1,000 Post Club Member
      • Apr 2004
      • 2246

      • Unknown

      • Correct Crafts

      #3
      Is your garage door opening 8'H or 7'H? What is most common or considered "standard" here in the midwest is a 7' high opening.

      Comment

      • sodbuster88
        Senior Member of PLANETNAUTIQUE
        • Nov 2008
        • 368

        • Clayton, NC


        #4
        I've got an 8' door (+/- 1 inch). Trailer is ramlin with 19 inch hitch ball height. I believe the boat sits just a bit higher on this trailer due to hull width. I have about 1.5 to 2.0 inches of clearance with the rig folded down behind the windsheild. Need to have the swivel racks turned in to give more clearance...when they are turned out, they become the constraint and barely fit under 8'. Hope this helps.
        Peace..

        Comment

        Working...
        X