Will this fit on an FCT 3 towerhttp://www.ebay.com/itm/Black-CHEERWAKE-Oval-Kneeboard

[Chosen1]

Just curious before I order and wanted to make sure

[HS]

Your asking about the tubing? Can you measure the diameter of the tubing on the tower? Otherwise you might end up needing a one eighth of an inch shim to make up the difference. . . Check menace wake.

[Montana Boat Guy]

Your FCT3 tower has 2 3/8" diameter tubing so that would need to be the clamp size you would need. We also offer a kneeboard rack that could bolt right in, replacing the factory board rack. If you wanted to add this rack to your current rack our plastic inserts are alot more freindly to your painted tower than the metal clamps with no inserts widely used out there. Please let me know if you need any other information. http://www.roswellwakeair.com/si-kneeboard-rack