Wake surfers!! Need vent help 00 210

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • 98motorsport3
    • Jul 2011
    • 70

    • NC

    • 99.5 SAN - Current 86 2001- RIP

    Wake surfers!! Need vent help 00 210

    So I've been a lurker for awhile on here and read some of the threads posted by other surfers regarding the vents on the sides of the v drive area on the older 210's. I get water coming in mine sometimes when loaded down for surfing and wanted to see if anyone had found a decent looking block off that's removable? Or if anyone has any ideas besides duct tape that would be awesome! Thanks in advance!
    99.5 SAN with some upgrades
    86 SN2001 - RIP
  • ers906
    Senior Member of PLANETNAUTIQUE
    • Feb 2010
    • 921

    • Phoenix AZ

    • 2013 G23 550 hp (ordered and awaiting delivery) 2002 Super Sport (coverted into a SAN) 330 hp Excaliber 1994 Sun Tracker Party Barge 115 hp 1989 Horizon 200 Four Winns - sold 1989 Regal Commodore 280 - previous Possibly looking into picking up a 70'2-80's Nautique to rebuild as a ski boat

    #2
    I actually re-routed the vent to the port side of the hull level with the windshield, haven't had a problem since
    Eric, Phoenix AZ

    G23 550 hp (finally here)
    2002 Super Air
    1994 Sun Tracker Party Barge 115 hp

    Comment

    • 98motorsport3
      • Jul 2011
      • 70

      • NC

      • 99.5 SAN - Current 86 2001- RIP

      #3
      I mean the actual v drive compartment vents. Not the ballast vent. The two that are on top of the deck silver, and let fresh air in to the engine area.
      99.5 SAN with some upgrades
      86 SN2001 - RIP

      Comment

      Working...
      X