2012 210 TE Ballast removal

[austin]

I plan to remove the rear ballast tanks out of my 2012 210 TE, and replace with 750lb bags. I want to confirm that when I disconnect the ballast level sensor that it will not lock out the ballast from pumping or filling?
Anyone done this process on a 2012?
Thanks

[djmekinac]

I would put in 1000 if you do not already have the 750, it should work, N3 does that on 210.

Browse this thread:

http://www.planetnautique.com/vb3/sh...light=210+surf

[jonfo]

i agree, go with the 1100, I have a 220 and the 750 only fills it 2/3 of the locker. I had to reinforce the wall between the locker and the engine compartment as well because the bag pushed in on it. just pull the quick disconnect on the ballast pickup on the tank and test it, it will still work.