Tweet
ZO holds speed at exact 0.5 mph less than the set speed. Worked perfect for the first 50 hours and then started having this issue.
River mode is off. The ZO set speed indicator on the digital speedometer on the 2013 LINC II sets correctly and the ZO partially engages. For example, set ZO to 22 mph. The red dot on the Linc Speedo will be at 22. Push the throttle all the down and the boat gets to 21.5. It may beep indicating ZO engagement or may not. The ZO set point on the speedo stays red (not at speed) or fluctuates red/yellow, but never gets green (speed reached). ZO therefore seems "aware" that the desired speed has not been reached. Increasing or decreasing the ZO set speed while underway changes the actual speed as expected, but always 0.5 mph lower. The boat still speeds up during turns to maintain speed.
Any one run into this issue or have a suggestion? Thanks everyone.
River mode is off. The ZO set speed indicator on the digital speedometer on the 2013 LINC II sets correctly and the ZO partially engages. For example, set ZO to 22 mph. The red dot on the Linc Speedo will be at 22. Push the throttle all the down and the boat gets to 21.5. It may beep indicating ZO engagement or may not. The ZO set point on the speedo stays red (not at speed) or fluctuates red/yellow, but never gets green (speed reached). ZO therefore seems "aware" that the desired speed has not been reached. Increasing or decreasing the ZO set speed while underway changes the actual speed as expected, but always 0.5 mph lower. The boat still speeds up during turns to maintain speed.
Any one run into this issue or have a suggestion? Thanks everyone.
Comment