230 w/orig Alum tower, anybody using Flight clips on the oval bars?

[Miljack]

Hi all,
just checking if anybody with the original '07-'09 towers is using flight clips on the oval bars? Just looking to add some board capacity and was curious of the pro and cons of this setup.

Pics help!

[s_kelley2000]

Are you asking if you can run the flight clips and spinners without interference? I can't tell from your avatar if you have the Titan tower or the FCT but if you have the FCT then I think the answer is yes but I have no idea if you have the Titan. My friend has an 07 220 with the FCT and he added the Flight Clips and they do not interfere with the spinners at all. Here is his thread discussing it:

http://www.planetnautique.com/vb3/sh...t=flight+clips

[Miljack]

Thanks Shawn, more asking about user experience for having both on their at the same time. I had both the spinners and flight clips on my previous boat (FCT 2), and it was ok, I was probably the only monkey that could use them both with boards loaded. The flight clips held my IS Red pretty well, and there were times we had a bunch of boards loaded up in both the spinners and the Flight Clips...With an over the top bimini, it was a stretch (literally) to get to the boards in the clips...