Full Boat cover?

[JamesHawk101]

Hey guys we are in the process of waiting for our G23 and were wondering if anyone has covers on their boat with side skirts? And if anyone knows of a good company to put side skirts on a existing factory cover. We live on the salt water in Tampa, FL and will be keeping the boat on a lift behind our house, so covering the sides from the salt and sun is a must. Thanks

[robertsmcfarland]

what I have done is to get light canvas material broken into two strips per side, broken where the main cover comes apart for the tower , put snaps on the main cover and the strips, have used the same strips on the last three boats just put snaps on the new main cover for each boat, my strips were 2 1/2 feet by 10 each, any seamstress can make the strips and you can buy the snaps and tool at lowes or home depo

[GCSuper]

This is what we did to stop the sun and rain:

[JamesHawk101]

This is what we did to stop the sun and rain:


[ATTACH=CONFIG]20685[/ATTACH]

I would do that by all means but, the city where I live doesn't allow boat houses. Pretty sure it's a no on touch less's too.

[Miljack]

I would just take the boat and cover to a good canvass shop and have them add the skirts. They can add a platform cover while they're at it. I would also consider folding your tower while stored and utilizing the factory cover to keep the tower and speakers/racks etc...protected.

[shag]

I would recommend A and D canvas in Orlando. I have had covers made by them for the last 20 years. He is very good. Not the cheapest, but very good.