Need some help...

[moto132]

I have a 1997 Super Sport that needs a new dash pod. I have called Buston, N3, Whitelake, Nautique Skins, The factory in Orlando and Central Kentucky Inboards with no luck. Can anyone point me in the direction of a 95-97 Super Sport or Sport dash? I would really appreciate as im not sure who else to call or what to do. Thanks

[bhectus]

Best of luck to you. Going to have to get REALLY lucky to find one of those.

[moto132]

Thats what im hoping for. Im hoping an older CC dealer will have one laying around with a bunch of dust on it. Fingers crossed!

[s_kelley2000]

Best of luck to you. What happened to the original one? This guy might be able to help you out. His contact info is on the last post in the thread:
http://www.planetnautique.com/vb3/sh...light=dash+pod

[moto132]

All of the mounting holes are torn. Just got off the phone with him. I am going to send him my dash in October and he will make me a mold. He didn't want me to send it now because he couldn't promise me it would be ready by summer. Ill plan on doing that but I'm still looking for the needle in the haystack! It has to be out there somewhere!

[bhectus]

Thats what im hoping for. Im hoping an older CC dealer will have one laying around with a bunch of dust on it. Fingers crossed!

well, you've already been in touch with all the people I would have suggested you contact. Keep your eyes peeled on adhuntr.com which used to be allofcraigs and ebay. might get lucky there.

[HS]

did you check CCFan.com?

[moto132]

Ive been checking ebay and all of craigs every day. I will post on CCFan right now.

[AllianceBJJ]

Try Race City Marine.....Reid is really into the classics and may have some knowledge about where to find. He is also on CCFan....

[Miljack]

Have a look at this one;

http://www.ebay.com/itm/Ski-Nautique...ab2f43&vxp=mtr

looks like a newer version of yours, but you could make it work. Also, easy to recover in black vinyl if that's your preference

[kylem03]

I was just recently in your shoes with my recently purchased '94 sport. The dash rattled like heck underway and upon taking it off, many of the mount holes were cracked. What I did was reinforce the areas on the back side with zinc washers and JB weld. Put the dash back on last week and its solid! In one of the spots missing a lot of material I sandwiched the dash pod between 2 washers underneath the vinyl and used the JB weld to build the material back up around it.

Hopefully I won't need to touch it again.

Kyle

[bhectus]

Have a look at this one;

http://www.ebay.com/itm/Ski-Nautique...ab2f43&vxp=mtr

looks like a newer version of yours, but you could make it work. Also, easy to recover in black vinyl if that's your preference

Definitely will not work.