Hi All!!! Pleasure to be with you.

[SNMike]

Just wanted to say greetings to you and let you know what a GREAT forum you have here. My name is Mike and my family lives in East Palatka Fla. About 25 minutes from St. Augustine. I think Palatka is an indian word for cow pie, I'm not sure. :grin: Anyway, Jeff it was nice to meet you at the reuinion. Hope you all can make it sometime. Quick backround, we have a late 02 SN196.This is our 3rd SN. Had a 90, 99, and now the 02. I wouldn't own anything else. We ski every weekend unless mother nature says no way. When we get home the 196 like all of our stuff is detailed. Beyond sanity. :mrgreen: We were blessed, and EXTREMELY LUCKY to win best of show at the 04 reuinion in Orlando last year. I've attached some pics to go with the name. If I can ever be of help to a member, i'll do my best to help. Thank You for your time and the very best to you and yours. SNMike

Sincerely, Mike & Tracy

[DRAGON88]

RE: Hi All!!! Pleasure to be with you.

Welcome! Very clean and good looking boat you have there!

[SNMike]

RE: Hi All!!! Pleasure to be with you.

Thank You Dragon88!!!!

[NautiqueJeff]

RE: Hi All!!! Pleasure to be with you.

Hi Mike! We had a great time at the reunion, and it was nice to meet so many Nautique owners. I'm actually heading back down your way next week. I'll be heading to Shaun Murray's to do some wakeboarding, then up to the Masters.

That's a great looking boat you've got there!

[SNMike]

RE: Hi All!!! Pleasure to be with you.

Thank You Jeff!! See ya at the Masters my friend!!! Mike

[AbunDiga909]

RE: Hi All!!! Pleasure to be with you.

Nice boat! I love that blue engine! :grin:

[talbertini]

RE: Hi All!!! Pleasure to be with you.

That is a gorgeous boat!

[SNMike]

RE: Hi All!!! Pleasure to be with you.

Thank you guys!!!! Thanks alot!!! Cheers!! Mike

[FatBoy]

RE: Hi All!!! Pleasure to be with you.

Great looking boat. Welcome aboard.

[SGY]

RE: Hi All!!! Pleasure to be with you.

Hey Mike. Very nice looking boat. Where did you get the different colored engine cover?

[SNMike]

RE: Hi All!!! Pleasure to be with you.

Hey SGY! I took the cover and the pulley and had my paint shop shoot them to match the boat. When I removed the aluminum PCM logo's I had my buddy who owns a graphic store scan them and reproduced them using 3 different colors on top of each other to give the decal a 3D look. The PCM logo on the manifolds I did by placing type paper over the stock logo, and pencil shading over it. Randy then scanned it, cleaned it up, and made it slightly bigger than stock. I carefully placed them over the stock emblems, smoothing out the air bubbles, and trimmed around it with an exacto knife. A vinyl decal would never last directly on the manifold. That was a little time consuming. Hope that helps my friend!!! Mike