Will a Kneeboard fit in the 08 SANTE 230 board racks?

[sheltonpg]

I am looking at purchasing a Kneeboard and want it to fit in my board racks. I have the 08 SANTE 230 board racks and want to know if anyone has had trouble fitting them. The bands will probably be too short so I may need to replace one. If anyone has had success with this what brand board was thin enough to fit in the board racks and what do you recommend?

[super01]

If it has the original forks for 2 wakeboards, you can get wake-surf combo forks here:

http://www.nautiqueparts.com/boardra...mentforks.aspx

[Nordicron]

I don't think any knee board will be thin enough? Just strap those boards to the top of your tower when not in use. I carry 2 sometimes 3 of them strapped on top of my tower.

[perry386]

If you flip it upside down and put it on top of the rack, you can use the bungee to hold it there. We did this for a while and then just quit kneeboarding.

[HS]

Two kneeboard types I've seen, the thick ones with plastic shell, and the advanced ones that look like they're built like wakeboards. Due to the thickness of the knee padding, I don't think either will fit into the board rack forks. On the old boat, I also would lay it pad side down across the top of the tower and bungee it in place. Haven't used it in a long time either -- but, yeah, you can replace the forks with products from Menace Wake / Star One that hold kneeboards. Best to verify the thickness first. Top of the tower is free, though!

[Montana Boat Guy]

Purchase a kneeboard specific rack like this one. http://www.roswellwakeair.com/series...neeboard_rack/

[DJH]

I've struggled with the same thing... I ended up storing it on the tower.

It'd be nice to see photos of the Roswell tines with a board in it... they look almost too wide.

Purchase a kneeboard specific rack like this one. http://www.roswellwakeair.com/series...neeboard_rack/