my tower creeks when pulling up a heavy wakeboarder or when they pull hard out to the side. anybody hear or have this?
X
-
Tags: None
-
Not sure about the 2012 models, but my 2011 was making some noises and over time, the safety bolts became harder to line up. Dealer fixed it under warranty and now it's quiet and the holes line up perfect.
Comment
-
Mine is doing the same. One day it was real bad in the chop, I let it down then put it back up ... That seemed to help in the short run. It's back to creeking a bit now2012 210
First and Current - 2012 210 SANTE
Comment
-
Originally posted by GCSuper View PostNot sure about the 2012 models, but my 2011 was making some noises and over time, the safety bolts became harder to line up. Dealer fixed it under warranty and now it's quiet and the holes line up perfect.
Comment
-
hah, right now I would be ok with just a little creaking! My port rear bolt broke in half last weekend. PITA to get the left over piece out and then, of course, Fastenal had to special order a replacement bolt.
Comment
-
If your 2012 FCT5 tower is creaking I recommend taking it to your dealership to be properly diagnosed and repaired. I wish I could diagnose it over this forum but that is just not possible. As an owner you could verify all hardware is properly tightened but remember if you turn a bolt with loc tite you have just broken the loc tite seal and would need to re-apply new loc tite. Please feel free to call us for technical questions or e-mail me directly at tracy@roswellwakeair.com.
Comment
Comment