G23 Ballast Pump Circuit Warning

[ttagliareni]

I took possesion of my G23 on July 3rd of this year. The boat recently displayed a warning message regarding the starboard ballast pump circuit. Since that message was displayed my G23 has started taking on ballast in all three tanks without any input from me. I don't know what triggers the pumps to start taking on ballast, it just happens at various intervals.

[nyryan2001]

Auto presets?

You said in the other thread you used the pro wakeboard presets... select them, your ballast will auto fill.

i had that error thrown once... I cleared it, never came back. It came on after I have been running my pumps for nearly 15mins. OEM tanks + 1100 piggys.

[ttagliareni]

I'm in Back to Dock mode when the ballast starts to fill on its own, so I don't think that's it, unless I'm missing your point.

[nyryan2001]

Back to Dock mode = pumps auto drain on their own.

I know you hear the pumps running... but they should draining not filling. Are you sure they are filling and not drianing? If you select back to dock, everything will auto -drain.

[ers906]

That code tends to get triggered if you stop your pumps by hitting the opposite button (empty to stop filling of that makes sense). I would clear the codes and reset to manufacturer settings, then custize to ur pref again. Do that when the boat is on the trailer or lift to ensure the ballasts are completely empty