keyed power wire for 04 SAN

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Grant_West
    Senior Member of PLANETNAUTIQUE
    • Jul 2003
    • 758

    • Redwoodcity Ca


    keyed power wire for 04 SAN

    I was wondering if anyone knew what colored wire is the kick on when you hit the start button.

    On my AIR its a purple wire,

    Im hooking up a Solonoid and was wondering what wire will give me 12v when the start buton is held
  • Frost
    • Jul 2003
    • 161



    #2
    RE: keyed power wire for 04 SAN

    yep, purple gets hot when the boat is put into "run mode" If you want the solonoid to get hot when the accessories get power (stereo, keypad functions) then you would want to use the red wire. Any purple wire (other than the speaker wire) is used for ignition power and any red wire in the boat is used for acc. If you use the red wire you will want to put a fuse/breaker in place, the boat is configured with breakers for the electrical system installed so anything you would add should have a fuse.

    Comment

    • Grant_West
      Senior Member of PLANETNAUTIQUE
      • Jul 2003
      • 758

      • Redwoodcity Ca


      #3
      Thanks Frost, Purple is the one I was looking for, Im sure with a test light and 5 min of pokeing around I would have found it , but Im glad you confermed it for me. This is a great place , Thats the 2nd time you have helped me out, I owe ya

      Thanks Frost.

      Comment

      • Frost
        • Jul 2003
        • 161



        #4

        Comment

        Working...
        X