Help me pick a hull decal

[Brichter14]

I just cant come to a decision. This is what the boat looks like now.



I am thinking between these three








Since the red/black on the side of the boat isnt perfectly straight I am a bit apprehensive on the "super air nautique" because i think it might be a bit low. ( i would put it on the red).

But i would also put the "air nautique" on the red.

I just cant decide.

[NautiqueJeff]

I personally like the Chromax Super Air Nautique the best. The tribal AIR looks cool, but it will be obvious that it isn't correct for the boat since it won't fit within the stripe.

[Double D]

I like the first option too. Classy looking. Second choice would be the second option but not sure how it would fit.


Sent from my New iPad Mini using Tapatalk

[Paxdad]

I like the second one but like someone else not sure how it would fit.

[nyryan2001]

You are in a tough spot with how that black/red division goes down the middle of the Hull.....

But with that being said, I agree with Jeff.... lettering on the first white boat.... in black chromax, 1/4" below the black stripe in the red.... starting exactly between the 2 tower legs.


Are you just going to order the same chromax letters as on the new 2013-2014 boats?

[Zach@n3]

If you want to drop some cash the new black chrome frost Chromax would look bad nasty on that boat with the red and black. That's my 2 cents. If you want to go cheaper the black drip mold would still look cool. I have an awesome shop that will do anything I want in drip mold decals (domed) so if you wanted to make up your own design I could probably have artwork in a week or so.

[Brichter14]

The first option is not actually the chromax letters but they are black with a chrome outline. Te second option is listed at approx 12" high so it would fit inside the red stripe also.

Zach what type of price would a drip mold like option one be for both sides of the hull?


this is option one

http://www.nautiqueparts.com/decalhu...0220or230.aspx

[s_kelley2000]

I vote option 1 as well. I always loved that option two graphic and there is somebody on here that added it to their boat with the same vintage gel lines. Let me see if I can find it. I'm personally not a big fan of the tribal graphics and think it will really start to look dated in a few years.

[migs]

#1

[s_kelley2000]

I always loved that option two graphic and there is somebody on here that added it to their boat with the same vintage gel lines. Let me see if I can find it. I'm personally not a big fan of the tribal graphics and think it will really start to look dated in a few years.

Here is the thread I was looking for: http://www.planetnautique.com/vb3/sh...er-Sport/page5

Also seeing the final results of the tribal graphic on Delmage's boat on page 6 I take back what I said about it, looks awesome with that placement. Not sure that would work with your color scheme though.

[Zach@n3]

That pricing on Nautique Parts is normal retail. That is the factory stuff. The drip mold I spoke of would be a custom design provided by you. Pricing may vary haha. Just shooting ideas since we have all winter here.

[josemolino]

Another option is the white version of the second logo. It looks classy and can fit over the red and/or black.

[swankster]

My vote . Option 1 one which gives it a newer look or leave it without one.

[Brichter14]

Im going to get option 1. Ill be sure to post pics on my build thread