PN Registration Numbers

[4th ski-doo]

I've seen a few of you have used Jeff and I've got a quick question.

Did they come pre spaced on a sheet so all the numbers can be installed in one shot?

Thanks! I need them and if I can support this site at the same time it's a win win.

[NautiqueJeff]

Yep, they come pre-spaced, and you can install them in one shot, all spaced out properly and looking good. They are pretty easy to apply. I would recommend going with the 2" size if you go with the standard Nautique font. The 3" numbers/letters in that font tend to make the overall length of the numbers very long. Some states (including mine) require the 3" numbers, but I have never run into any issues running the 2". That being said, it is your responsibility to order letters that meet your state requirements if you're concerned. If you order another font, the 3" size isn't as much of an issue.

Here are the 2" numbers on my 2013 G23.

[4th ski-doo]

Thanks Jeff! Even if they wanted 3 the 2's look pretty good. Thank you very much!

[4th ski-doo]

After hours of thought I've decided to just order the 3" ones that are required. My last boat I used Domed Numbers, they were 3 inches also, but with the colors I have now I'm thinking that black in the Nautique font will look great on this black and white gem.

Also I've read that the Domed letters don't last that long either. Last thing I want in the late afternoon, just taking the boat out for a cruise, is a stop for numbers! Call me chicken but I'll find a way to make the 3" look good, actually you and the boat will.

Thanks

[jbach]

i'd also recommend the 2" size unless you have a 230 or G. the 3" size swallowed the bow of my 210, 2" was perfect and they look great!