I'm sure this has been posted before, but I did a quick search and couldn't find exactly what I was looking for. I have 750's on top of stock tanks in the rear and stock belly tank plus 650 under bow seating in the front. Lake is right around 30 ft deep and typically have 3-4 people in the boat. Last weekend was the first time I've tried surfing with my 2011 210 so we were doing a little experimenting, but could use some help to optimize. We had surf side completely filled at the rear and opposite side emptied. I believe the front was completely filled as well, but not sure on that. Everyone on the boat sat surfside at the rear or middle. Speed was right around 9.5 mph. Does anyone have a similar setup that can tell me what works best for them?
X
-
Tags: None
-
Similar set-up to yours, but I think the biggest difference is our zero-off speed setting. We are usually around 10.5 - 11. Really cleans up the wave. Next time you load up, get up to speed and try gradual increments of added speed until you see what you like.
Our set up: 750s piggy backed on rear(s) and usually only fill one side. Piggy backed to the belly is the FH Center Locker Arrow sac. I have just 200# of pop-products to simulate an add'l passenger on the riders side. make sure your belly tank is full (and the forward sac)2010 Super Air Nautique 210 Team Edition
Comment