NSS Differences between 2012, 2013 and 2014 ?

[Dave Rittiman]

Does anyone know what the differences are between the NSS setup up's on a 230 SANTE from a 2012 - 2014 ? I know the 2012 had just the aluminum plates with the lenco actuator with no covers.

1. Are the hull / transom the sames in the 2012 - 2013's 230 ? ( I believe the hull was changed some on the 2014 if i remember correctly is this right ? )
2. Do they use the same NSS plates for a 230 vs a 210 ?>
3. Did they change Link 2.0 system at all from 2012 - 2014 ?
4. Do the plates extend the sames distances from the 2012 to the newer version ?

2012 No Covers for NSS plates or Actuator




2013 With Covers Actuator is covered


Thx
Dave

[Nautiques_NZ]

Are the hull / transom the sames in the 2012 - 2013's 230 ? Yes - 2014 is different
Do they use the same NSS plates for a 230 vs a 210 ?> No - 210 & 230 are quite different
Did they change Link 2.0 system at all from 2012 - 2014 ? No - There have been many software revisions though
Do the plates extend the sames distances from the 2012 to the newer version? Haven't really looked it at, but i cant imagine there would be much difference as they use the same actuator.

[Laptom]

Viewing the 2 pics above shows that the plate itself looks quite different. The 12 is following the curves of the transom while the 13 has a more boxed design.

[Live to surf]

This is because the two pictures are of different boats. The top is a 230 and bottom is a G23. The NSS plate shape is different for all models as it follows the shape of the hull.


Sent from my iPhone using Tapatalk

[lucky7t]

That's odd. I didn't think that the 13 had the black covers on the nss. I thought they only came on the 14

[s_kelley2000]

That's odd. I didn't think that the 13 had the black covers on the nss. I thought they only came on the 14

The G's had the covers from the get-go but the 210 and 230 didn't get them until the hull was redesigned to work better with NSS in 2014.

[Dave Rittiman]

You are right found out more info the 2012-13 used the same NSS setup with the exposed plates and lenco rams.

The 2014's they changed the transom of the back of the boat to be flat and the also have covers.


Sent from my iPhone using Tapatalk

[hotrod508]

Zero differences in the wave it puts out....2007 with homemade plates does just as good as a 2014'. We put about 300 hours on the surf system I made its worth it!

Only downside is the lack of automatic controls and safety features.