Carbon Fiber Dash Peices

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Grant_West
    Senior Member of PLANETNAUTIQUE
    • Jul 2003
    • 758

    • Redwoodcity Ca


    #1

    Carbon Fiber Dash Peices

    Ok Here we go again, I was thinking of making a few sets of Carbon Fiber dash peices. I wanted to make some sets. A set would include.

    1. the 2 peices on either side of the throttle
    2. the 1 peice on the dash next to the remote.

    I can make pretty much any peice you want. The only thing is its not cheep. And Im not intrested in making 1 peice for this year or that yeat I would like to make sets for each boat. Let me know what your looking for and I can look into what needs to be done and priceing.
  • Grant_West
    Senior Member of PLANETNAUTIQUE
    • Jul 2003
    • 758

    • Redwoodcity Ca


    #2
    more

    Comment

    • breakz77
      • Dec 2004
      • 134

      • Discovery Bay, CA


      #3
      I would love to get them for my 05 210. I want the piece by the throttle, the main power switch, ballast gauges and the other piece on the dash around the remote. I know we talked about it earlier this year so please let me know. I can send you cash anytime. Thanks in advance!!!!!!!!

      Comment

      • Grant_West
        Senior Member of PLANETNAUTIQUE
        • Jul 2003
        • 758

        • Redwoodcity Ca


        #4
        Just to be sure can you post or send a Photo of the peices your talking about. I think your throttle is the same as myn. The balast gauges and the power switches and the dash I think are diffrent? If I had a phot I would know what boat to get molds from

        Comment

        • wake-sk8
          • Oct 2005
          • 121



          #5
          Love the 'bling bling' ballast guages, they are the best ! Carbon looks awesome too...

          Comment

          • breakz77
            • Dec 2004
            • 134

            • Discovery Bay, CA


            #6
            I won't be home for 2 days but as soon as I am I'll take pics and send them to you. Thanks again!

            Comment

            • Grant_West
              Senior Member of PLANETNAUTIQUE
              • Jul 2003
              • 758

              • Redwoodcity Ca


              #7
              Yes please send them or post them here. my e-mail is grantwest@gmail.com

              Comment

              • sperbet
                • Aug 2004
                • 283

                • Truckee, CA


                #8
                how did you do the piece with the "N" logo and the other white lettering?? Just curious because I want to do the dash of my 95 SS, but I need to label all of the circuit switches.
                Ummm, I\'ll take the REAL 210 please. Thanks.

                Comment

                • Grant_West
                  Senior Member of PLANETNAUTIQUE
                  • Jul 2003
                  • 758

                  • Redwoodcity Ca


                  #9
                  My friend (jeff) at Astro graphics re-made all the art work on the circut switches plate. After they were installed I sprayed some clear over the top along with all the other Carbon Fiber peices. With letters that small they have a hard time sticking and will come off pretty easy. The clear coat helps hold them down so that you dont end up loosing any letters

                  Comment

                  • DRAGON88
                    Senior Member of PLANETNAUTIQUE
                    • Jul 2003
                    • 529

                    • Eugene, Oregon

                    • 1999 Sport Naqutique 2005 Super Air Nautique Team Edition

                    #10
                    Grant, it'll probably be out of my price range, but when you get a price on the 05 peices (minus the toggle switch) hit me up with a PM please.
                    How about \"Chales\"?

                    RIP Nikolai (\'05 SANTE) 5/23/05 - 4/30/06

                    Comment

                    Working...
                    X